AQUILA V1
Scratch / Self built
🔧 Building🔧 Scratch built
AQUILA V1 is a scratch-built experimental water rocket using a multi-bottle PET pressure vessel. It features a custom 3D-printed fin can, three 5 mm XPS fins, interchangeable nozzle diameters, an electronic parachute deployment system using a Mercury V1 altimeter, and a 70 cm parachute. Designed primarily for altitude testing and iterative aerodynamic development.
Historia lotów
Brak lotów
Specyfikacja fizyczna
Średnica
88.00 mm
Długość
1320.00 mm
Masa sucha
450.00 g, no motor
Stateczniki
3 SELITAC 5 mm (XPS foam)
Materiał korpusu
PET Bottle
Silnik & odzyskiwanie
Stopnie
1
Odzyskiwanie
Parachute
Rozmiar spadochronu
70.0 cm
MOTOR MOUNTS
Custom
Dane aerodynamiczne
Wsp. oporu
—
Pow. odniesienia
0.005970 m²
CP
—
CG
—
Notatki z budowy
Custom PET multi-bottle pressure vessel with 35 mm bonded overlap joints. Main body diameter 87.2 mm. Reinforced 3D-printed fin can with three removable XPS fins and dual locking pins. Interchangeable 7.0; 7.5; 8.0; 8.5; 9.0; 9.5; 10.0 mm water nozzles. Custom 3D-printed nose section containing Mercury V1 flight electronics, LiPo battery and linear-servo parachute release. Pressure vessel undergoing hydrostatic validation before flight.
Comments & reactions
Neil
13-Sep-2026 o 00:47
That looks amazing!
Haiirone
17-Sep-2026 o 19:13
Thanks! This image was generated with AI, but the real rocket should look very close to this overall. The general shape, proportions and design are already pretty much what weâre building.
Zaloguj się
Działa na Altimeter Cloud