Magnetic switch
Points Shop

Magnetic switch

1,165 pointsWorth £11.65

Smart magnet switch with optional input, buzzer and onboard switch as optional control. Remembers its state so power blips wont lose power if it is supposed to be on. Ultra low standby current of 4.5uA (Around 3mAh per month!)

In stock

You need an Altimeter Cloud account and challenge points to order.

  • Paid for with challenge points only. Nothing here is sold for money.
  • Posted to the address you confirm at checkout.
  • 30 day returns: send it back unused and we'll refund the points in full.

About this reward

Our magnetic switch is a step up from your average mag switch.

The sensitive magnet sensor actions a state change after you hold a magnet near it for 2 seconds.
If you turn the device on it will give 5 short beeps to let you know it's on and turn on the onboard LED.
When the device turns off a long single tone will sound.

While turned on the buzzer will give a short beep every 10 seconds so you can listen to your rocket and know your switch is on.

The magnetic switch saves it's state in non volatile memory so any short power outages will not reset the switch and power will remain ON or OFF once restored.
We've also included two decently sized capacitors that can power the onboard microcontroller for 10 seconds to avoid it shutting down at all during short power loss events.

Furthermore, there is a onboard button that you can use to action the switches state change instead of a magnet. There is also a input connection point that you can use with a 3 to 12 volt input signal to action the switch (a 3.3V output point is available to connect a external push button to this point). You can also program the switch yourself if you wish to use it in a different way. The final pin is a UPDI programming connection, you can program using Arduino and the Adafruit UPDI HV Friend board if you fancy a project!

Small, light and versatile
- Up to 35A peak current for 0.5s and 20A for 2-3 seconds.
- 10A continuous current.
- Small size 20 x 15mm (~0.78" x 0.59")
- Just 1.1grams weight (~ 0.035 oz)
- Input range of 2.9V to 12V
- OFF mode current of just 4.5uA (About 3.2mah per month!)
- Onboard microcontroller, buzzer for audible indication of state and state LED
- Programmable for custom operation if you require.
- Reverse polarity protection.
- 2oz, 4 layer high quality PCB and full surface mount components. 
- State memory. The switch will always return to it's last state after power loss. 
- 4x 2.7mm mounting / terminal holes / solder with additional smaller solder holes for maximum installation options. 
High quality solid state MOSFET
The two MOSFET's run in series. The first one deals with polarity protection and the second controls the output.
These MOSFET's have extremely low resistance to avoid generating too much heat and can handle up to 35 Amps temporarily and 10-12 Amps continuously with ease. 

The magnet switch sensor is extremely sensitive and actions the device when it detects a magnet present for 2 seconds. This allows you to turn your rocketry electronics on or off using a magnet from outside of your rocket.
Multiple ways to turn the switch on or off
The magnet switch can also be turned on or off using the onboard push button. You can also connect an external push button or other input to the PB pin. Just send it a 3 to 22V signal for 2.2+ seconds to change state.

If you're using a external push button, you can use the 3V pin and the PB pin to easily connect one. 
Customisable, program it yourself
If you want you can program the magnet switch yourself.
It runs on a ATtiny816 microcontroller and has a UPDI programming pin available (labelled PR).

We made our program using the Adafruit UPDI HV Friend programmer and Arduino IDE software. The default firmware is below to get you started along with a link to the schematic.

More from the points shop

3x Interruptores de parafuso

3x Interruptores de parafuso

Práticos pequenos isoladores de chave para isolamento de energia ou ignição. Um pacote com 3.500 pointsView →
Mercury V1 32G mini computador de voo

Mercury V1 32G mini computador de voo

Um conjunto completo de sensores em uma cápsula que ainda cabe dentro de um conoide de nariz. Além da altitude, registra aceleração, rotação e orientação, então os gráficos mostram o que a fuselagem realmente fez em vez de apenas quanto de altura atingiu. Faz upload via Wi-Fi e configura pelo navegador, sem necessidade de instalar software.6,446 pointsView →
Computador de Voo Mini Mercury Plus 256G

Computador de Voo Mini Mercury Plus 256G

Mercury V1 com canais de saída adicionados, no mesmo invólucro de 30 x 16,9 x 10,8 mm com 4,6 gramas sem acabamento. Ele usa o mesmo conjunto de sensores e a mesma configuração em nuvem, e adiciona a capacidade de disparar uma carga no apogeu em vez de apenas monitorar o voo. O altímetro para migrar quando o modelo precisa fazer algo no topo.9,554 pointsView →
O Nano avançado altímetro diminuto

O Nano avançado altímetro diminuto

Este é nosso altímetro minúsculo, embora tenha grande potência e se mantenha firme contra a concorrência apesar de seu tamanho. Registrando em até 833Hz e 38000 amostras por voo, o Nano também executa nossos filtros TrueFuse e TruePath, oferecendo dados incríveis e precisos sem compromissos.5,399 pointsView →
Only 2 leftTUBBZ: 2001: Uma Odisseia no Espaço - Dr. David Bowman - Brinquedo de Pato de Borracha Colecionável 9 cm

TUBBZ: 2001: Uma Odisseia no Espaço - Dr. David Bowman - Brinquedo de Pato de Borracha Colecionável 9 cm

Esta figura de pato Dr David Bowman é imprescindível para fãs de mercadorias Kubrick e colecionáveis de cultura pop. Destaque-se com esses patos colecionáveis divertidos e cosplayers - perfeitos para adicionar um toque especial ao jeep ducking. Coletar personagens de filmes, jogos, bandas e programas de TV, reimaginados como figuras de patos cosplayers. Aproximadamente 9 cm (3,54 polegadas) de altura fora da embalagem, um tamanho ótimo para sua prateleira, mesa ou painel de controle do carro.1,400 pointsView →
Jupiter flight computer

Jupiter flight computer

The Jupiter is our flagship flight computer and tracker all in one. It has a cellular modem and 10 years of line rental included. There is also plenty of data to ensure no worries tracking and flight log uploads to the AltimeterCloud without even thinking about it. Fly, and your data will be ready for you. The Jupiter is packed with sensors and abilites, it can handle most rocketry tasks you might want to achieve.23,700 pointsView →
Only 1 leftFoguete Starship

Foguete Starship

Projetado para gerar uma chama à prova de vento digna de seu nome, o Starship Torch portátil tornará fácil o trabalho de selar qualquer coisa, desde bife até merengue. Fora da cozinha, acenda o Starship para iluminar velas ou sua lareira. Quem precisa de fósforos fracos quando você tem o poder do Starship nas mãos?18,000 pointsView →
Voucher de £50 para a loja Modelrockets.co.uk

Voucher de £50 para a loja Modelrockets.co.uk

Voucher de £50 para a loja Modelrockets.co.uk6,000 pointsView →
Voucher de £25 para a loja Modelrockets.co.uk

Voucher de £25 para a loja Modelrockets.co.uk

Voucher de £25 para a loja Modelrockets.co.uk2,750 pointsView →
Voucher de £10 para a loja Modelrockets.co.uk

Voucher de £10 para a loja Modelrockets.co.uk

Voucher de £10 para a loja Modelrockets.co.uk1,100 pointsView →
Points are for rewards onlyPoints can't be bought, sold, passed to someone else or swapped for money. They're won in our challenges and spent here.
30 day returnsNot happy with something we posted? Send it back unused within 30 days of it arriving and we'll put the points back in full. Email info@modelrockets.co.uk first so we know it's coming. Vouchers can't be returned once the code has been sent.
Fair playPoints won by breaking a challenge's rules can be taken back, along with anything spent from them. If something doesn't look right, let us know.