Vzdálenost
Zvolte jednotku vzdálenosti: Metry(m), Stopy(ft), Míle(mi) nebo Kilometry(km)
Rychlost
Zvolte jednotku rychlosti: m/s, ft/s, mph nebo km/h
Zrychlení
Zvolte jednotku zrychlení: m/s² nebo G
Let 2946

Flight 2946

FlightSketch Mini · imported log
Apogeum
98.13m
4.62 s after launch
Max. stoupání
45.7m/s
peak ascent
Max. při spalování
0.01G
during the burn
Přistání
29.22s
touchdown 3.7 m/s
FlightSketch Mini
Third party device
This log was uploaded from a FlightSketch Mini, a non AltimeterCloud device.
ZOOM TO
s
s
Zobrazit události
Stáhnout
Upravit tepl. & tlak ?
Obrázek
Přiblížení
Klikněte a táhněte nebo použijte gesto
Porovnat let ?
Shrnutí letu

The flight, moment by moment

Liftoff
0 s
Found byFlightSketch Mini
Logging50/s
Burnout
0.46 s
Výška9.86 m
Rychlost48.880 m/s
Apogeum
4.62 s
Výška98.13 m
TruePath apogee98.13 m
Ejection
5.06 s
Výška96.93 m
Rychlost-3.01 m/s
Log ends
45.62 s
Výška-1.51 m
Logging50/s
Výška
Apogeum98.13 m
Čas do apogea4.62 s
Apogee, TruePath98.13 m at 4.62 s
Apogee stated by the FlightSketch Mini98.23 m
Highest raw altitude98.33 m at 4.64 s
Highest altitude as the FlightSketch Mini recorded it98.25 m at 4.68 s
Rychlost
Max ascent, TruePath45.7 m/s at 0.62 s
Max ascent, raw (device)48.99 m/s at 0.42 s
Max descent, TruePath-6.89 m/s at 6.88 s
Typical descent rate, TruePath2.65 m/s
Velocity at burnout48.880 m/s
Max acceleration (device)19.75 G at 5.08 s
Max acceleration total as the FlightSketch Mini recorded it17.63 G at 0.22 s
Časy
Liftoff0 s
Burnout0.46 s
Ejection5.06 s
Log ends45.62 s
Obecné
AltimeterFlightSketch Mini
Log formatFlightSketch
Datum nahrání17/09/26-21:17:08
Datové vzorky2506
Celkový čas záznamu50.101 s
Logging rate50/s
Imported from the log file the FlightSketch Mini wrote. Its own figures are shown as it recorded them; the TruePath figures are worked out here on the website from its altitude column.
Uživatelské poznámky
Žádné poznámky
Přidejte toto zařízení ke svému účtu pro úpravy
Youtube video
Žádné video
Přidejte toto zařízení ke svému účtu pro úpravy
Obrázky letu 0
Žádné obrázky
Flown as
Rocket
LOC Precision
Motor configuration
Custom
1× AeroTech G80T-10, set on this flight
Loaded weight
627.9 g
set on this flight
Motory letu
1st stage · 10s delay
1×G80T-10AeroTechDetails
Burn time
1.7 s
Diameter
29.00 mm
Average thrust
77.6 N
Max thrust
108.5 N
Total weight
127.90 g
Propellant weight
62.50 g
Propellant type
Blue Thunder
Impulse136.6Ns
Max thrust108.5N
Burn time1.7s
Impulse classG
1st stage thrustloading curve…
Motor data by ThrustCurve.org
Přidejte toto zařízení ke svému účtu pro úpravy
Propojená raketa
Active
1 photo
My Lil Nuke #1
LOC Precision — Lil' Nuke
9 flights linked
Type
Kit build
Diameter
57.4mm
Length
749.3mm
Empty weight
368.5g
Mod
Modified
Stages
1
Fins
3
Recovery
Parachute
Chute
61cm
Body
Loc paper tube
💬 7 comments · 👍 2 reactions
Sim data from sim files
MotorAltVelAccelApogeeSource
Estes A8-3135.3 m64.8 m/s29.6 G4.5 sRockSim (estes_viking.rkt)
Estes B4-4282.9 m105.3 m/s30.0 G6.1 sRockSim (estes_viking.rkt)
Estes B6-4288.1 m116.9 m/s31.0 G5.9 sRockSim (estes_viking.rkt)
Estes C6-5475.1 m171.4 m/s34.4 G7.5 sRockSim (estes_viking.rkt)
Estes C6-7483.1 m171.4 m/s34.4 G8.1 sRockSim (estes_viking.rkt)

Linked flights

Connect flights that belong together: a second altimeter flown in the same rocket, or the same rocket flown again. Linked flights appear on each other’s pages.

No linked flights yet.

Místo startu, datum a čas

Klikněte na mapu pro označení místa startu. Přepínejte mezi mapou a satelitním pohledem.

Imagery © Esri, Maxar, Earthstar Geographics

Klikněte na mapu · Přetáhněte pro úpravu

Canopy height from the Meta and WRI High Resolution Canopy Height Maps v2 (Meta and World Resources Institute, 2026; source imagery © 2016 Vantor), used under CC BY 4.0. Ground elevation built from Terrain Tiles (Mapzen and AWS Open Data), derived from 3DEP and GMTED courtesy of the U.S. Geological Survey, SRTM courtesy of NASA, and ETOPO1 courtesy of NOAA. Map and imagery credited on the view above.

No launch site has been set for this flight.

FlightSketch MiniFlightSketch Mini
FlightSketch Mini
FlightSketch
FlightSketch Mini
This flight was recorded on a FlightSketch Mini, another make of altimeter, and imported from its log file. The owner calls it Its a test flightsketch2.
The hardware
MakerFlightSketch
ModelFlightSketch Mini
SensorsBosch BMP388 baro, Bosch BMA253 accelerometer, Nordic nRF52811
Log formatFlightSketch

The log

Other makes of altimeter keep their settings on the device and do not write them into the log, so there are none to show here. This is what the file itself told us.
This flight
Log formatFlightSketch
Datum nahrání17/09/26-21:17:08
Datové vzorky2506
Celkový čas záznamu50.101 s
Logging rate50 per second
ProcessingTruePath, on the website
Getting logs off the FlightSketch Mini
Open the flight on the FlightSketch website and use the "Download Data (.csv)" link below the acceleration chart. Upload that file unchanged.

Files

Where the altimeter signs its log, the file carries that signature and a tick beside it. A tick means the data is unchanged since the device wrote it, which is what a record claim needs.
CSV
2946.csv
The log as columns of text. Opens in a spreadsheet, and in every simulator that reads flight data.
239 KB
Adjusted CSV2904 recalculated in your browser
The log recomputed for your own sea-level pressure and temperature. Columns: time, altitude as recorded and adjusted, raw altitude as recorded and adjusted, pressure.

This file is built here from the signed log, so it carries no signature of its own. Anyone verifying a claim should be sent to the flight page and build their own from the original.

Custom CSVbuilt in your browser
Pick any of the chart’s data sets, the worked-out ones included, and the part of the flight to cover. Values come in the units the chart is set to.
In the file
Time span

One row for every time any chosen data set has a sample. A data set with no sample at that time is left blank rather than filled in. Built from the chart’s data, so it carries no signature.

Let
Komentáře
Přihlásit se pro komentování.
Přihlásit se pro komentování.