USB Wifi configurator
You can use this tool to configure your Wifi networks for your altimeter device. Your device will then connect to the internet and you can configure it and use it directly from this website. If this does not work you should check your device is on the latest firmware which you can update on this page.
1
Connect your altimeter to the PC you are using this browser on with a USB cable and turn it on. Wait until the status LED is BLUE or GREEN.
2
Click connect device on the right. Choose your altimeter from the list in the pop up box it is probably called USB/JTAG and click connect.
3
Fill out your Wifi name and passwords to connect to your internet in the two wifi and pass boxes, and pick a new password at least 8 characters long for the devices internal AP Wifi.
4
Click on Send settings. Your altimeter will apply these and reboot itself. You will need to refresh this page if you want to use it again.
5
If you sent the right WiFi details your altimeter will strobe green slowly once connected to the internet. You can then add and configure it on the altimeter cloud using the My devices page.
Your browser does not support this tool.
This tool works with modern Google Chrome, Microsoft Edge and Opera browsers (probably not mobile versions).
This tool works with modern Google Chrome, Microsoft Edge and Opera browsers (probably not mobile versions).
Wifi name #1
Wifi pass #1
Wifi name #2
Wifi pass #2